Ring 'A':
Ring A is a round design eliminating any pinching or chaffing
while being worn.
 There
is a center recessed hole that accepts the locking pin.
There are two side holes that accept the guide pins
from the 'B' ring. The guide pins are designed to take
the torque when one becomes erect. The 'A' ring comes
in five different sizes: 1 1/2" I.D., 1 5/8"
I.D., 1 3/4" I.D., 1 7/8" I.D. and 2.0"
I.D. The five 'A' rings are included with each order.
This helps to eliminate the need to find an exact size.
Ring 'B':
Again, is a round design. The 'B' ring has 2 guide
pins that feed into the 'A' ring. The locking pin feeds
from the 'A' ring through the 'B' ring and accepts either
a small brass padlock or plastic lock for security.
Rings 'C' and 'D':
 These two rings are connected by way of bars that connect
to the 'B' ring. Rings 'B', 'C' and 'D' make up one
complete unit. This cage portion encases the penis and
attaches to the 'A' ring.
Ring 'D':
Two small bars go across the bottom of Ring 'D'. This
prevents manual stimulation while still allowing use
at the urinals.
The Center Length of the Cage Portion is 2 1/2".
The inside diameter is 1 1/2". Please take the
size into consideration when ordering. Weight..CB-2000
weights less than 2 1/2 ounces completely assembled
with the plastic lock. Various sized spacers are provided
for the purpose of security and comfort according to
the individual need.
Locks: 
Brass Padlock: A durable brass padlock with 2 keys
is provided with each order.
Plastic Locks: Each order receives 5 plastic locks.
Each lock is individually numbered to assure tamper
proof. Once the plastic locks have been engaged the
only method of removal is to cut the lock itself, they
cannot be re-attached or glued back in place.
|
